Putting on the Belt

The belt supports the device while you are scanning.

1. You will find the belt in the Transport Box at the back.
   

2. Putting on the belt

   1. Wrap the belt around your waist. The hook holster must face forward.
      

   2. Make sure the straps are not twisted. Secure the belt at the back using the plastic buckle.
      

Note: If required remove the back pad for a tighter fit or add the belt extension for a wider fit (provided in the box).

3. Tighten the belt by pulling on the straps.
   

4. Put on the NavVis VLX

   Put the hook into the holster of the belt and rest the shoulder hooks on your shoulders.

   

5. Testing the fit

   Most of the weight should be carried on the waist and a little on the shoulders.

   • If too much weight is on your shoulders use one size larger.

   • If too much weight is on your waist use one size smaller.

   Note: To readjust the size, put the NavVis VLX back in the box, refer to Adjusting the Size.