Adjusting the Size
  • 29 Jan 2024
  • 1 Minute to read
  • Dark
    Light
  • PDF

Adjusting the Size

  • Dark
    Light
  • PDF

Article summary

Note: This step should only be performed if the size needs adjusting.

  1. Remove the screws

    With the NavVis VLX in the box, remove the two screws with the torque wrench provided.

    A hand holding a screwdriver  Description automatically generated
  2. Adjust the size

    Slide the belt hook to the correct size. The device can be adjusted to the following height sizes: XS (Extra Small), S (Small), M (Medium), L (Large), and XL (Extra Large).

    A close-up of a hand holding a screwdriver  Description automatically generated
  3. Tighten the screws

    Install the two screws with the torque wrench provided. Keep turning until you hear a sharp click.

    A hand holding a screwdriver  Description automatically generated


Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.