Repacking

Procedure

1. Place the NavVis VLX in the box

   Put the shoulder hooks into the box first

   

2. Remove the batteries and the SSD

   Put them in the slots in the foam.

3. Loosen the screws

   Use the provided torque wrench to loosen the screws securing the folding mechanism.

4. Fold the NavVis VLX

   Completely fold the device into the box, and do not drop it. Keep your fingers and clothes clear of the folding mechanism to avoid pinching them.

5. Put the accessories in the box

   Place the belt into the slot at the back of the box. You must insert the lower side of the belt into the box first. If you purchased your with NavVis VLX six batteries, place the two extra batteries in the two compartments under the belt. Make sure all items are secure in the box.

   

6. Close the box securely

   Secure all seven latches before moving the box.