Ensure that the NavVis VLX has been setup correctly, refer to the documentation in the Shipping Case or here.
Make sure the device is placed on a level surface such as the ground or a table.
Press the Power On button.
Caution: Do not move the device during this step, this is because the inertial sensors inside the device are calibrating, and they are very sensitive to movement. If it is moved during startup, the screen will indicate the need for another calibration. Wait approximately 30 seconds. Refer to Calibrating the IMU of the Device.
.jpg?sv=2022-11-02&spr=https&st=2025-12-05T08%3A04%3A52Z&se=2025-12-05T08%3A15%3A52Z&sr=c&sp=r&sig=mtnfttgvRlH%2Ban3S6VwYqlAVGzPS7Puu8mUNnQZTPT4%3D)
The NavVis System Software launches automatically after the system initializes.
If this is the first time powering on the mobile mapping system, accept the license.
The screen will display the Home Screen and the device is ready for scanning.
FAQ
What should I do if the screen indicates a need for recalibration?
If the screen indicates a need for recalibration, ensure that the device is placed on a stable surface and restart the calibration process.
Can I use the NavVis VLX on any surface?
No, it is important to place the device on a level surface like the ground or a table for proper operation.
What should I expect to see on the screen after the system initializes?
After initialization, the screen will display the Home Screen, indicating that the device is ready for scanning.
Is there a specific order to follow when setting up the NavVis VLX?
Yes, follow the setup instructions in the documentation, ensuring the device is stationary during startup.
What should I do if the NavVis System Software does not launch automatically?
If the software does not launch automatically, check the power connection and ensure the device is properly set up.