Panoramas Management

While scanning you can view and manage the panoramas previously taken. The thumbnail image shows the last image taken and number of recorded images in the dataset.

1. Click on the thumbnail image.

2. The following information is displayed for each set of captured panoramas: image number, time the image was recorded, and the mode of panorama (270°or 360°).

   1. Note: If the panorama was triggered in 270° mode, the last image will be blank.

   2. If the panorama was triggered in 360° mode, the image of the operator will be removed if they are within the masked area, if they are outside the masked area they will be visible.

3. Tap on a panorama to see a larger view of the panorama and the direction in which each image was captured (left, front, right back).

4. Swipe left and right to navigate between panoramas.

• Click the Convert to 270° button to change from 360° to 270° and vice versa.
  Note: You can only perform this conversion from the device.

• To delete the selected panorama, tap the delete icon and then confirm deletion.