Setting Up

The NavVis MLX comes in a robust Shipping Case. Use the Shipping Case to move the device when: Travelling through an airport, and you are checking-in the device into the hold of the aircraft. There is a risk of damage to the device while in...

Only use Li-Ion Batteries designed for use with the device and approved by NavVis. Check the Li-Ion Battery level Press the button on both the supplied Li-Ion Batteries to check if they need charging. You need at least 51-75 % full to begin ...

Place the device on a flat surface Place the device on a flat level surface such as a table or the floor. Clean the cameras, scanner, screen If there is dust or fingerprints on the cameras, laser scanner or screen, use the clean and d...

Caution : The Harness System is only designed to support the device while scanning. It should not be considered as personal protective equipment (PPE) in the event of a fall or other type of accident. Warning: Always take care when wearing ...

Note: To update the NavVis system software you need a NavVis MLX license subscription. You can update the System Software from the Help menu or the Settings menu. Before you begin, connect the device to the internet via an Ethernet cable a...