Checking and Charging the Li-Ion Batteries

Only use Li-Ion Batteries designed for use with the device and approved by NavVis.

1. Check the Li-Ion Battery level

Press the button on both the supplied Li-Ion Batteries to check if they need charging. You need at least 51-75 % full to begin scanning (3 of the 4 lights on).

The LEDs on the Li-Ion Battery indicate different levels of charge:

2. Assemble the Battery Charger

Insert the Battery Power Cable to the Battery Charger.

Insert the Li-Ion battery, make sure it is fully inserted.

Connect the Battery Power Cable to an appropriate power source:

• The LED indicator on the Battery Charger will turn red as it is charging and green once the Li-Ion Battery is fully charged.

• Disconnect the Li-Ion Battery once charging is complete.

• Dispose of the Li-Ion Batteries properly in compliance with local regulations Contact NavVis Support for instructions on the correct recycling procedure.