Attach the mounting adapter: Securely screw the NavVis CLX Mounting Adapter onto the top thread of the extension pole.
Mount the NavVis CLX: Insert the extension pole into the base of the device. Align the triangle symbols on the handle and device body.
Lock the pole sections: Extend the pole only as far as needed, then fully tighten all telescopic clamp locks to prevent slipping, rotation, or vibration during scanning.
Check stability before scanning: Hold the pole upright, confirm the NavVis CLX is secure, and verify that the setup remains stable before starting the scan.
Setting Up the Extension Pole
- Published on Sep 23, 2026
- 1 minute(s) read
Was this article helpful?