Cleaning the Camera Lenses
  • 10 Sep 2024
  • 1 Minute to read
  • Dark
    Light
  • PDF

Cleaning the Camera Lenses

  • Dark
    Light
  • PDF

Article summary

Camera lenses should be cleaned every time the device is removed from the Shipping Case or the Backpack. Before each scan make sure the lenses are dust-free and free from fingerprints.

If lenses are not clean, any panoramas captured during a scan will be blurry and might show unwanted light effects.Procedure

  1. Remove dirt, dust, and water.
    Use an air blower or soft-bristled brush to remove dust and dirt from the surface of the lens. If wet, gently dry the lens with a clean and dry microfiber cloth.

  2. Clean the lens.
    Use a clean and dry Microfiber Cloth to clean the lens. Move it in a circular motion from the center of the lens.

  1. Deep clean if necessary.
    If the lens is still dirty, put a few drops of isopropyl alcohol on the Microfiber Cloth and clean the lens again. Do not apply cleaning fluid directly onto the surface of the lens.

caution(1)Caution: Excessive cleaning may damage the anti-reflective coating.


Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.