Replacing the NavVis MLX Fan Filters
- 17 Sep 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Replacing the NavVis MLX Fan Filters
- Updated on 17 Sep 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Follow these instructions to replace the Fan Filter on your device.
Caution: If a warning is displayed indicating overheating at temperatures around 30°C, check to see if the Fan Filter is clogged. If it is clogged, replace it with a new Fan Filter, two are supplied in the Shipping Case. We recommend that they are replaced once a year.
The Fan Filter is located in the Back Cover of the device. To replace the Fan Filter perform the following:
Pinch the two plastic tabs together as shown below.
Pull out the Fan Filter Retainer.
Replace it with a new Fan Filter.
Add the new Fan Filter into the Back Cover.
Put the Fan Filter Retainer back into the Back Cover.
Was this article helpful?
