- 17 Sep 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Controlling the view
- Updated on 17 Sep 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Panning, rotating, centering, and zooming the Scanning Screen
On the Scanning Screen, you can pan, rotate, zoom, and center the map during the scan.
While scanning, touch the screen and use your fingers to control the screen. The yellow circles represent fingertips.
Changing the Floors of the Dataset
To check back on previously scanned floors below or above your current location, you can change the vertical view of your dataset.
During the scan, pause the scan by tapping the Pause Icon.
On the left of the screen, the Vertical View Slider is displayed. Each number on the slider represents one meter (m) above (positive) or below (negative) of the device's current location (0 m). Slide the vertical view slider up or down to move above or below the current view. As the slider moves, the selected meter number is displayed between the lines, and the scanned dataset at that meter level is displayed on the Scanning Screen.
3. Tap the Start Icon to resume scanning. The Vertical View Slider goes back to the current view (0 meters) and is hidden.