An overview of the different parts of NavVis VLX.
Note: The device shown here is the NavVis VLX 3, but the corresponding parts are the same across the NavVis VLX series.
Parts | Description |
|---|---|
Control Point Button | Located on the top of the device and is used during scanning to create control points. |
Sensors and Cameras | Used for capturing visual and spatial data during scanning. |
Display | Used for navigating and interacting with the device. |
Trigger Button | Located near the display and helps capture visual data during scanning workflows. |
USB Port | Located on the handle and is used for turning the device on or off. |
Ethernet Port | Located near the lower handle and is used for wired network connections and data transfer. |
SSD Slot | Located at the base of the device and houses the removable storage for scanned data. |
Battery | Located at the base of the device and supplies power to the device during scanning operations. |
Battery Release | Located near the battery at the base of the device. |
Belt Hook | Located at the base of the device and is used to carry or secure the device when not in use. |
Top Laser Scanner | Located at the top of the device and captures laser scan data during operation. |
Cameras | Located at the top of the device and captures visual data for mapping and imagery. |
Frame | Supports and connects all major components of the device. |
Shoulder Hooks | Located on the upper frame and supports handling the device. |
Folding Mechanism | Allows the device to be folded for transport or storage. |
Locking Screws | Located near the folding mechanism and helps to secure the frame in position during operation. |
Bottom Laser Scanner | Located in the lower part of the device and captures additional laser scan data. |
Handle | Located on the lower part of the frame. |
Serial Number | Located near the handle and is the unique device unit identifier. |