My NavVis
API Documentation
Login
Contents
x
NavVis MLX
NavVis VLX
NavVis IVION
NavVis IVION Processing
NavVis Academy Documentation
NavVis IVION Go
NavVis M6
NavVis IVION API
NavVis Desktop Processing
Subscription Management
Support by Topic
Technical Blog
Powered by
Control Points
5 Articles
in this category
Share this
Print
Share
Dark
Light
Contents
Control Points
5 Articles
in this category
Share
Dark
Light
Control Points
Another effective method for improving map accuracy are control points. By supplying additional, external information about the real-world position of the device, this feature improves the trajectory estimate and allows for automatic geo-registratio...
Updated on : 18 Mar 2024
Placing Control Points
A control point is a specific point on the floor or wall of the Site . It has to be marked clearly and assigned a unique identifier. The following are recommendations for control points: Distribute control points evenly. Place them more than 5m...
Updated on : 18 Mar 2024
Using Control Point Stickers
A control point can be any specified point on the floor of the mapping site. Each control point must meet the following criteria: It is marked clearly with a cross (defines the exact location). It has an ID that is unique within the mapping pr...
Updated on : 29 Jan 2024
Creating the Control Point Poses File
Control point coordinates (poses) should be measured by a surveyor, using a total station. To use the poses in post-processing, they must be listed in the Control Point Poses File. Note: This file might also be named SLAM Anchor Poses File. ...
Updated on : 18 Mar 2024
Scanning with Control Points
Note : You can capture a control point more than once within a Dataset if it is passed multiple times during mapping. Note: If the control point is not saved within 60 seconds it must be set again. Procedure Press the control point but...
Updated on : 18 Mar 2024
Change password!
Changing your password will log you out immediately. Use the new password to log back in.
Current password
Current password is required
New password
New password must be at least 8 characters long. It should contain at least one upper and lower case letter, number, and a special character.
Confirm password
Confirm password must be at least 8 characters long. It should contain at least one upper and lower case letter, number, and a special character.
Confirm password should be same as new password
Update
Change profile
Success!
First Name
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last Name
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
New email
Enter a valid email
Re-enter your password
Enter a valid password
Your profile has been successfully updated.
Update
Logout