Caution: Mechanical and chemical hazard.
Excessive cleaning may damage the anti-reflective coating.
Only clean if necessary with a clean and dry microfiber cloth. Always follow the recommended procedure.

Remove dirt, dust, and water.
Use an air blower or soft-bristled brush to remove dust and dirt from the surface of the lens. If wet, gently dry the lens with a clean and dry microfiber cloth.
Polish the lens.
Use a clean and dry microfiber cloth to polish the lens. Move it in a circular motion from the center of the lens.
Deep clean if necessary.
If the lens is still dirty, put a few drops of isopropyl alcohol or commercial lens cleaner on the microfiber cloth and polish the lens again. Do not apply cleaning fluid directly onto the surface of the lens.

FAQs

How often should I clean the camera lenses?

Clean the lenses only when necessary. Excessive cleaning can damage the anti-reflective coating on the lens surface

What’s the safest way to remove dust and dirt from the lens?

Use an air blower or a soft-bristled brush to gently remove loose dust and debris from the lens surface before wiping it.

Can I use any cloth to clean the lens?

No. Always use a clean and dry microfiber cloth. Other materials may scratch or damage the lens.

What if the lens is wet?

If moisture is present, gently dry the lens using a clean, dry microfiber cloth before attempting to polish it.

How do I properly polish the lens?

Using a clean microfiber cloth, gently polish in a circular motion starting from the center of the lens and moving outward.

How do I perform a deeper clean if the lens remains dirty?

Apply a few drops of isopropyl alcohol or commercial lens cleaner to the cloth, not directly on the lens. Then polish the lens as described.

Can I spray cleaner directly onto the lens?

No. Never apply cleaning fluids directly to the lens surface. This can damage the lens or its coating.

What risks are involved with improper cleaning?

Improper or excessive cleaning may result in:

Scratches
Damage to the anti-reflective coating
Blurred or degraded image quality

Cleaning the Screen