Using Control Point Stickers
  • 29 Jan 2024
  • 1 Minute to read
  • Dark
    Light
  • PDF

Using Control Point Stickers

  • Dark
    Light
  • PDF

Article summary

A control point can be any specified point on the floor of the mapping site. Each control point must meet the following criteria:

  • It is marked clearly with a cross (defines the exact location).

  • It has an ID that is unique within the mapping project.

  • It includes an explanation of what the sticker is for.

  • It is made of robust material, such as intended for outdoor use.

NavVis provides a PDF template for two different types of control point stickers:

  1. Stickers without numbers

  2. Stickers with a numbered label "000" that can be changed by a printing supplier to sequential numbering (000, 001, 002, nnn…)

Stickers without numbers

Stickers with a numbered label

A blue and white circle with white text  Description automatically generated
A blue and white circular chart  Description automatically generated

The template without a number can be printed in a roll "as is". Surveyors can enter their own numbers on the sticker during surveying.

The template with a number should be provided to your printing supplier with instructions to replace the "000" with sequential numbers (000, 001, 002, nnn…) prior to printing.

Note: Stickers should be printed on robust sticker material. User can also design their own stickers, as long as it meets the above criteria.

Attachments

Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.