- 09 Sep 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Repacking
- Updated on 09 Sep 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Remove the Li-Ion Battery and USB - C-Flash Drive from the Back Cover
Open the Back Cover and remove the Li-Ion Battery and USB-C Flash Drive.
Put them in their respective slots in the protective foam of the Backpack.Insert the NavVis MLX into the Backpack
Insert the head of the device into the protective foam first.
Put the equipment in the box
To prevent the buckles of the harness damaging the scanner or camera lenses, be sure to put the Harness System in its bag, then put the bag into its respective slot of the protective foam.
There is space for an extra Li-Ion Battery in the protective foam.
Caution: Do not transport the device with the Li-Ion Battery or USB-C Flash Drive inside the device.
Check its secure
Make sure all items are secure in the protective foam of the Backpack.
Secure the Backpack
Make sure the Backpack is fully zipped up and secure.Insert the Backpack into the Shipping Case
Use the straps of the Backpack to lift and insert it into the Shipping Case.
Close the Shipping Case securely.
Secure all latches before moving the Shipping Case.