NavVis VLX 2 Specifications
- 08 Jul 2024
- 2 Minutes to read
- Print
- DarkLight
- PDF
NavVis VLX 2 Specifications
- Updated on 08 Jul 2024
- 2 Minutes to read
- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Laser Scanners
Number of laser scanners | 2 x 16 layers |
Laser Class | 1, eye-safe per IEC 60825-1:2007 & 2014 |
Wavelength | 903 nm |
Raw laser range | up to 100 m |
Operational range | up to 50 m |
Points per second | 2 × 600,000 |
Accuracy
Accuracy of Point cloud | 6 mm (local accuracy) |
Control point support | Ground and wall |
Cameras
Number of cameras | 4 |
Image resolution | 4 x 20 megapixel |
Focus | Fixed |
Lens | Fisheye, 3.3 mm, aperture f/2.4 |
System Operation
Batteries | 2 x 2 Li-ion 95 Wh V-Mount Micro, hot swappable |
Operating time | 1.5 hours (with 1 set of 2 batteries). |
Storage | Portable SSD with 1TB storage |
Interfaces | Wi-Fi, Bluetooth |
Sensors | IMU |
Field of view (FOV) of each laser | 360º horizontal, 360º vertical |
Display
Type | AMOLED |
Size | 5.5 inches |
Resolution | 1920 x 1080 px |
Touch Technology | Capacitive Multi-Touch |
Environment
Note: A warning is displayed if the device was stored in a cold environment and requires extra time to reach operating temperature.
In temperatures above 35 °C, scanning time might be limited to prevent the device from overheating. A warning is displayed if the device gets too hot. In this case, end your scanning, turn off the device, and let it cool down in a cool environment before you start a new scan.
The NavVis VLX guarantees constant data quality over a wide temperature range.
Operating temperature | 0°C to 40°C, non-condensing (refer to note below) |
Non-operating temperature | -10°C to 40°C (refer to note below) |
Operating Environment | Indoors and building surroundings |
Dust and humidity protection | IP42 |
Note: An operating temperature of -10°C (14°f) is achievable when:
The device has been switched on for 20 minutes at a minimum temperature of 0°C (32°f).
The duration of scanning is kept to a maximum of 20 minutes.
The atmospheric conditions are calm (no wind).
Output
Images | JPEG |
Point cloud formats | E57, LAS, PTS, XYZ, PLY |
Physical
Design | Powder coated and anodized aluminum, plastic covers and protection, carbon frame |
Weight (with two batteries mounted) | 8.68 kg |
Belt weight | 0.4 kg |
Dimensions (cm) (H x W x L) | 108.5 x 33 x 45 |
Housing | Anodized aluminum |
Transportation Box
Dimensions (H x W x L) (cm) | 81.6 x 54 x 42.6 |
Weight (fully equipped) | 24.8 kg |
Ingress Protection (IP) rating | IP67 |
Sensors
Cameras | 4 |
LiDAR laser scanners | 2 |
Wi-Fi antenna | 1 |
Bluetooth antenna | 1 |
Inertial Measurement Unit (IMU) (includes accelerometer) | 1 |
Power Supply
Number of batteries supplied | 4 |
Number of batteries used to power device | 2 |
Battery type | Li-ion, V-Mount Micro, hot-swappable |
DC output of batteries | 14.4 V (nominal) |
Capacity per battery | 6.6 Ah |
Energy per battery | 95 Wh |
Weight per battery | 550 g |
Typical operating time (two batteries) | 1.5 h |
AC input of charger | 90 – 264 V / 47 – 63 Hz |
Charging channels | 2 |
Charging time (two batteries) | 2.5 |
Was this article helpful?
