NavVis
Point Cloud Settings
  • 18 Mar 2024
  • 1 Minute to read
  • Dark
    Light
  • PDF

Point Cloud Settings

  • Dark
    Light
  • PDF

Article summary

The following Point cloud settings are available for data captured with NavVis M6 and NavVis VLX:

  • Point Cloud Resolution

  • Point Cloud Color

The following point cloud settings are only available for data captured with NavVis M6:

  • Sharp Edges (default): This mode produces point clouds with details and edges in the scanned area reconstructed with a low amount of smoothing during filtering. However, the point cloud may contain noise and rough-looking surfaces.

  • Balanced: This mode is a balance between smooth surfaces and sharp edges. The point cloud might contain more noise on surfaces than smooth-surfaces mode, but will have sharper edges.

  • Smooth Surfaces: Surfaces will appear smooth and with a low amount of noise, but edges will appear less sharp compared to other modes. The point clouds will contain the lowest amount of noise with this mode.

    PC_Settings

The following point cloud settings are only available for data captured with NavVis VLX:

  • High Confidence: In this mode only points with high confidence are retained and regions that have not been scanned densely are removed. This mode is recommended for narrow indoor environments.

  • Standard: This mode is for general use and yields high-quality point clouds in a wide range of scenarios. This mode is recommended for larger indoor environments.

  • Outdoor: In this mode points from sparsely scanned areas are retained. This mode is recommended for outdoor environments.

    VLX_Settings


Was this article helpful?

Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.