Introduction
- 17 Apr 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Introduction
- Updated on 17 Apr 2024
- 1 Minute to read
- Print
- DarkLight
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
This section contains information on how to set up the hardware of the NavVis VLX.
![A white and black device next to a black case Description automatically generated](http://cdn.document360.io/bf174766-fa1a-4fe1-a4d7-b1db1e7cb996/Images/Documentation/hardware-setup-instructions-image-qil3nap6.jpg?sv=2022-11-02&spr=https&st=2024-09-08T02%3A00%3A02Z&se=2024-09-08T02%3A10%3A02Z&sr=c&sp=r&sig=9g9xazuvtUIZXTkP0KwfM5vmNMhGhyGL5EMOn7fDrI8%3D)
Caution:
Do not attempt to dismantle or repair your NavVis VLX. Refer here for support information.
Caution:
Do not remove the NavVis VLX from the box until instructed.
Do not adjust the size of the NavVis VLX while scanning a dataset.
Note: Only one person is required to perform all tasks.
Note: Time required for assembly of the device is approximately 10 minutes.
Note: A screen protector can be purchased in local stores. Screen dimensions are 5.5'' / 140.40 mm x 74.76 mm. Only the NavvVis VLX 2 comes with a screen protector.
Contents of the box
![A black case with a device in it Description automatically generated](http://cdn.document360.io/bf174766-fa1a-4fe1-a4d7-b1db1e7cb996/Images/Documentation/hardware-setup-instructions-image-nu6r4cyy.png?sv=2022-11-02&spr=https&st=2024-09-08T02%3A00%3A02Z&se=2024-09-08T02%3A10%3A02Z&sr=c&sp=r&sig=9g9xazuvtUIZXTkP0KwfM5vmNMhGhyGL5EMOn7fDrI8%3D)
Was this article helpful?