--- title: "Troubleshooting" slug: "troubleshooting-3" type: "index" canonical: "knowledge.navvis.com/troubleshooting-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://knowledge.navvis.com/llms.txt > Use this file to discover all available pages before exploring further. # Troubleshooting 1 sub category | 20 articles ## [NavVis VLX Quality Map Checklist](https://knowledge.navvis.com/docs/vlx-quality-map-checklist.md) Updated on 2026-04-24 | Published on 2026-04-21 Before finishing a scan, check the quality map using the following checklist: General scan quality checks Trajectory continuity: Check the path is continuous; no visual breaks or sudden jumps in the... ## [Fixing Control Point Name Errors in NavVis Device Scans](https://knowledge.navvis.com/docs/what-to-do-if-i-input-a-wrong-anchor-control-point-name-during-mapping.md) Updated on 2025-12-02 Issue description This procedure describes what to do if you have entered an incorrect control point name recorded with your NavVis VLX. Sometimes you noticed that during scanning right after you... ## [How do we know if SLAM is drifting or broken?](https://knowledge.navvis.com/docs/drifts-and-breaks.md) Updated on 2026-07-03 | Published on 2026-04-14 Using control points (also called checkshots or check points) during a scan helps improve Point cloud accuracy. However, the use of control points cannot always prevent twisted or tilted scans. This... ## [Troubleshooting NavVis VLX warnings and errors](https://knowledge.navvis.com/docs/troubleshooting-navvis-vlx-warnings-and-errors.md) Updated on 2025-09-23 | Published on 2024-01-03 Introduction Problem description If the mobile scanning system detects a problem, it displays a notification, warning, or error. Warnings can be resolved by the operator without stopping the mapping... ## [Troubleshooting NavVis VLX battery notifications](https://knowledge.navvis.com/docs/troubleshooting-navvis-vlx-battery-notifications.md) Updated on 2025-12-02 | Published on 2024-01-03 Issue description If the batteries on the NavVis VLX are missing, low in charge, or empty of charge, a notification will appear with the severity of the battery problem and how to fix it. The severity... ## [Troubleshooting NavVis VLX SSD not found error](https://knowledge.navvis.com/docs/troubleshooting-navvis-vlx-ssd-not-found-error.md) Updated on 2025-02-04 | Published on 2024-01-03 Issue description The following error will display if the SSD is not fully inserted, incorrectly formatted, or corrupted Troubleshooting procedure Ensure that the SSD is properly inserted into the... ## [Correcting a wrong selection of belt hook size on the NavVis VLX 1/2 before processing](https://knowledge.navvis.com/docs/correcting-a-wrong-selection-of-belt-hook-size-before-processing.md) Updated on 2025-02-03 | Published on 2024-01-02 Issue description If you have selected a belt size in the UI of the NavVis VLX screen and proceeded to scan only to realize the wrong belt setting was selected, this can be corrected. No rescans are... ## [Minimizing distortions within panorama](https://knowledge.navvis.com/docs/evaluating-and-best-practices-for-minimizing-distortions-within-panoramas-1.md) Updated on 2026-08-18 | Published on 2024-01-02 Issue description When evaluating the quality of panoramas, distortions of objects captured can be seen occasionally. This article describes the reasoning for this issue as well as best practices to... ## [Steps to Resolve NavVis VLX Scanning Problems](https://knowledge.navvis.com/docs/navvis-vlx-cannot-finalize-dataset.md) Updated on 2025-12-02 | Published on 2024-01-03 Issue description The NavVis VLX user interface freezes, or a Dataset cannot be completed. Troubleshooting procedure Perform the following troubleshooting in the order shown, only move onto the next... ## [Troubleshooting the NavVis VLX battery and charger](https://knowledge.navvis.com/docs/troubleshooting-the-vlx-battery-and-charger.md) Updated on 2025-12-02 | Published on 2024-01-03 Issue description The battery is malfunctioning and not powering the device as expected. When pressing the LED power button on the side of the battery or when putting it on the charger, the charger... ## [My map and anchor residuals are worse when I use control points](https://knowledge.navvis.com/docs/why-are-my-map-and-anchor-residuals-worse-when-i-use-control-points.md) Updated on 2025-09-23 | Published on 2024-01-03 Issue description It seems like when I use control points they make the quality of the scan worse and not better. Troubleshooting procedure There could be an issue with the surveyed control points... ## [The NavVis VLX User Interface not displaying correctly](https://knowledge.navvis.com/docs/the-user-interface-not-displaying-correctly.md) Updated on 2026-04-15 | Published on 2024-01-12 Issue description The NavVis VLX screen does not display correctly. Text is misplaced and buttons cannot be clicked. Specifically, the Dataset naming screen displays incorrectly, as shown below. This... ## [Checking Control Point Errors after Processing](https://knowledge.navvis.com/docs/checking-control-point-errors-after-processing-1.md) Updated on 2026-03-06 | Published on 2024-10-08 Post-processing creates error logs and graphs that show drift errors in the device trajectory before and after applying surveyed control points. In each dataset folder under datasets_proc, two main... ## [Improving point cloud color quality](https://knowledge.navvis.com/docs/improve-point-cloud-color-quality.md) Updated on 2025-09-23 Issue description The post-processed cloud has vague colored patches in large areas. Very few details can be observed from the Point cloud , only shapes. This could be because not enough panorama... ## [Restoring Your NavVis Device with an ISO Image](https://knowledge.navvis.com/docs/restoring-your-navvis-vlxmlx-device-with-an-iso-image.md) Updated on 2026-02-23 | Published on 2025-05-23 Introduction In corner cases, when the NavVis device is experiencing operating system failures and cannot boot correctly, it is then required to flash and restore the system to a specific image. This... ## [How to exit the stuck Mapping UI](https://knowledge.navvis.com/docs/how-to-exit-the-stuck-mapping-ui-1.md) Updated on 2025-10-13 | Published on 2025-10-13 Introduction How to exit the mapping UI, when the UI has no option to exit via the touch screen using a USB keyboard. Procedure Connect the USB keyboard to your device. For the NavVis VLX use the... ## [Can my NavVis device scan near high electromagnetic fields?](https://knowledge.navvis.com/docs/vlx-scanning-near-high-electromagnetic-fields.md) Updated on 2025-01-29 There is only limited testing performed using NavVis devices in strong electromagnetic environments. The NavVis VLX has passed in magnetic fields up to 30A/m (50/60 Hz stimulation), but a test against... ## [Reseller Partners](https://knowledge.navvis.com/docs/reseller-3.md) 6 articles ## [Troubleshooting: NavVis VLX boots into a black screen](https://knowledge.navvis.com/docs/vlx-boot-into-black-screen.md) Updated on 2025-09-23 | Published on 2024-01-11 Issue description In rare cases, the NavVis device comes on with a black screen without showing the mapping UI or Ubuntu desktop. Potential causes: Display panel damaged. System might be corrupted due... ## [Troubleshooting when the device displays a blank, faulty, or constantly red indicator, even when the batteries are fully charged](https://knowledge.navvis.com/docs/troubleshooting-device-displays-blank-faulty-constantly-red-batteries-charged.md) Updated on 2025-09-23 Introduction Problem description The battery indicator displayed on the NavVis VLX is blank or red. An incorrect percentage charge might be displayed for the batteries immediately after they were... ## [Log Files](https://knowledge.navvis.com/docs/log-files-1.md) Updated on 2025-04-15 Support engineers might require log files for troubleshooting. Send these log files to support@navvis.com for analysis when reporting an issue. Refer to the How to video here . Types of Log Files...