---
title: "Repacking the NavVis VLX"
slug: "repacking"
description: "After scanning, put the NavVis VLX back into the storage box using these instructions"
status: "update"
updated: 2026-09-21T09:57:08Z
published: 2026-09-21T09:57:08Z
canonical: "knowledge.navvis.com/repacking"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.navvis.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Repacking

## 

1. **Place the NavVis VLX in the box**

Put the shoulder hooks into the box first

![A woman carefully handles equipment from a protective case labeled 'Fragile'.](https://cdn.document360.io/bf174766-fa1a-4fe1-a4d7-b1db1e7cb996/Images/Documentation/Replace.png?sv=2026-02-06&spr=https&st=2026-10-15T07%3A56%3A00Z&se=2026-10-15T08%3A56%3A00Z&sr=c&sp=r&sig=Nx5IvzpAvynwohV4vO2QPChm2hZUAcU0y1z40h6MYZU%3D)
2. **Remove the batteries and the** SSD

Put them in the slots in the foam.
3. **Loosen the screws**

Use the provided torque wrench to loosen the screws securing the folding mechanism.
4. **Fold the NavVis VLX**

Completely fold the device into the box, and do not drop it. Keep your fingers and clothes clear of the folding mechanism to avoid pinching them.
5. **Put the accessories in the box**

Place the belt into the slot at the back of the box. You must insert the lower side of the belt into the box first. If you purchased your with NavVis VLX six batteries, place the two extra batteries in the two compartments under the belt. Make sure all items are secure in the box.

![](https://cdn.document360.io/bf174766-fa1a-4fe1-a4d7-b1db1e7cb996/Images/Documentation/Pull_Out_Belt(1).png?sv=2026-02-06&spr=https&st=2026-10-15T07%3A56%3A00Z&se=2026-10-15T08%3A56%3A00Z&sr=c&sp=r&sig=Nx5IvzpAvynwohV4vO2QPChm2hZUAcU0y1z40h6MYZU%3D)
6. **Close the box securely**

Secure all seven latches before moving the box.

Solid State Drive