---
title: "How to exclude some control points from Processing"
slug: "excluding-control-points-from-processing"
description: "This describe how you can deselect or edit the control points that are causing problems."
tags: ["NavVis IVION Processing", "wall mounted anchors", "SLAM Anchor", "Cloud Processing Error", "Coordinate reference system", "Anchor Position", "SLAM Error", "Control Points", "File Validation", "Processing Task"]
updated: 2025-10-28T08:45:15Z
published: 2025-10-28T08:45:15Z
canonical: "knowledge.navvis.com/excluding-control-points-from-processing"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://knowledge.navvis.com/llms.txt
> Use this file to discover all available pages before exploring further.

# How to exclude some control points from Processing

When you upload a control points file, the file will be validated. If there are any warnings or errors you can deselect or edit the control points that are causing problems.

## Procedure

1. In your processing task, click **View control point configuration**.
2. Deselect the check boxes next to the control point(s) you want to exclude from processing.

![A screenshot of a computer Description automatically generated](https://cdn.document360.io/bf174766-fa1a-4fe1-a4d7-b1db1e7cb996/Images/Documentation/image-1706099352518.png?sv=2026-02-06&spr=https&st=2026-11-04T01%3A25%3A19Z&se=2026-11-04T02%3A25%3A19Z&sr=c&sp=r&sig=C7Pkuo%2F6ywgoTOJPpO45ql7oD7BX3CiJOj1a6zvloak%3D)
3. Click **Save changes**.